Smart Hub Operations; Smart Hub Wi-Fi; Lennox-Managed Local Network; Lennox Center Push Button Switch - Lennox iComfort S30 Installation And Setup Manual

Smart Hub Wi-Fi

The Smart Hub internal Wi-Fi module can remain connected to the home Wi-Fi
network (and the Internet) while establishing and maintaining special ad-hoc
Wi-Fi P2P (peer-to-peer) network connections (Smart Hub Wi-Fi network) with
a nearby mobile device. The home must have a Wi-Fi router to provide
point-to-point connections between Smart Hubs. The Smart Hub can still
communicate directly with the mobile device but not directly with another Smart
Hub located in the home.
The iComfort Mobile Setup application running on a mobile device cannot
reach a Smart Hub through the Internet or through the home Wi-Fi network.
The mobile device must be Wi-Fi-capable, must be located in the home, and
must use Smart Hub Wi-Fi to connect to a Smart Hub.

Lennox-Managed Local Network

NOTE - A router with Bonjour capabilities is required for this function. Check
the router functions if Smart Hubs do not connect. Apple Bonjour
implementation of Zero-configuration networking (Zeroconf), a group of
technologies that includes service discovery, address assignment, and host
name resolution.
Smart Hubs have the ability to connect to other iComfort
Lennox software to create a special Lennox-managed local network. A
Lennox-managed local network is independent of the home Wi-Fi network. A
Lennox-managed local network is similar to the home LAN (local area network)
that operates over the home Wi-Fi network in that it provides a means for
devices to communicate directly with each other. Also, a Lennox-managed

SMART HUB OPERATIONS

local network is different from the home LAN in that it allows only Lennox
devices to connect to it. A Lennox-managed local network operates only
between a Smart Hub and a nearby Wi-Fi-capable mobile device running the
iComfort
Up to eight Smart Hubs, each controlling a separate HVAC system in a home,
can be connected together over a Lennox-managed local network. Even if eight
Smart Hubs are connected to each other over the Lennox-managed local
network running on the home Wi-Fi network, a mobile device running the
Lennox Dealer Mobile Application can still connect to the Lennox-managed
local network over the Smart Hub Wi-Fi network.
NOTE - Service device will only see the Smart Hub that it is directly connected
too.
Wi-Fi-capable mobile devices running the Lennox Dealer Mobile Application
must be on the premises and connect directly to a Smart Hub through a Smart
Hub Wi-Fi network. The Lennox Dealer Mobile Application cannot connect to
a Smart Hub through the home Wi-Fi network or from the Internet.

Lennox Center Push Button Switch

The Smart Hub center push button switch:
S
Resets the Smart Hub
S
Starts the process of creating a special Lennox-managed local network
between two iComfort
S
Starts the process of adding another iComfort
Lennox-managed local network
An iComfort
®
is a Wi-Fi capable mobile device like a smart phone or a tablet running the
iComfort Mobile Setup application.
A Lennox-managed local network can connect Smart Hubs together through
the home Wi-Fi network or connect a Wi-Fi-enabled mobile device running the
® S30 devices running
iComfort Mobile Setup application to a Smart Hub through a Smart Hub Wi-Fi
network.
The identity of devices requesting connection to a Smart Hub is rigorously
authenticated before connection is allowed to ensure that only iComfort
devices connect to a Smart Hub.
15
® S30 service mobile application.
®
S30 devices
®
S30 device can be another Smart Hub installed in the home or
®
S30 device to an existing
®
S30