Table of Contents
Advertisement
Selecting 2 and pressing Enter in the DIAGNOSTIC MENU displays the following
submenu:
DIAGNOSTICS - HARD DISK FORMAT : VX.XX
1 - All track FORMAT
2 - Good track FORMAT
3 - Bad track FORMAT
4 - Bad track CHECK
9 - Go to TEST MENU
↑↓→← : Select items, Enter: Finish, Esc: Exit
1.
All track FORMAT
Pressing 1 selects All track FORMAT, which lets you format the entire disk.
[All track FORMAT]
Drive
Cylinder
Head
Sector
<<< Model name = >>>
The following selections display at the bottom of the screen in succession:
Drive number select (1:#1,2:#2) ?
(a)
Select a drive number and press Enter . The following message will appear:
Interleave number (1/1 ~ 8) ?
(b)
Select an interleave number (1 ~ 8) and press Enter . Pressing only Enter
selects 1.
(c)
Select whether the disk has an unlock format.
(d)
Bad track register
The Bad Track register prompt will appear as shown below.
[ WARNING : Current DISK data will be
Press Bad cylinder number (dddd)] key ?
Press Bad head number (dd)] key ?
Enter the cylinder and head numbers of bad tracks and press Enter. Note
that if there are no bad tracks, pressing Enter alone is the same as executing
the All Track Format described in item (e) below.
3-40
:
#1 = HDD
#2 = Non
:
XXXX
:
XX
:
XX
completely destroyed ]
650CT
Advertisement
Table of Contents
Troubleshooting
