Table of Contents
Advertisement
3.7
Display Test
To execute the Display Test, select 4 from the DIAGNOSTIC TEST menu, press Enter and
follow the directions displayed on the screen. The Display test contains six subtests that test
the display in various modes. Move the highlight bar to the subtest you want to execute and
press Enter.
Subtest 01
VRAM Read/Write for VGA
This subtest writes constant data AAh and 55h and address data to video
RAM (2MB: A0000h-AFFFFh). The data is then read from the video RAM
and compared to the original data.
Subtest 02
Gradation for VGA
This subtest displays four colors: red, green, blue and white from left to right
across the screen from black to maximum brightness. The display below
appears on the screen when this subtest is executed.
To exit this subtest and return to the DISPLAY TEST menu, press Ctrl +
Break.
Subtest 03
Gradation for LCD
This subtest displays eight colors: red, semi-red, green, semi-green, blue,
semi-blue, white, and semi-white. Each color is displayed full screen for three
seconds.
3-14
650CT
Advertisement
Table of Contents
Troubleshooting
