Toshiba 650CT Maintenance Manual page 112

To display the capacity of the hard disk, use the CHKDSK command. See
your DOS documentation for details on using CHKDSK.
NOTE: Formats for Enhanced IDE and Standard IDE are different. If you
change the setting, you will have to reformat the hard disk for the appro-
priate setting.
5. Battery
This option lists the BATTERY SAVE OPTIONS. Selections include Full
Power, Low Power, or User Setting.
Full Power
Low Power
NOTE: In boot mode, the System Auto Off message does not appear.
User Setting This option allows you to set the battery save parameters on the
(a) Battery Save Options
The following set of options can be selected in the submenu of the
User Setting, which is one of the Battery Save Mode options.
3-58
The following shows full power settings.
BATTERY SAVE OPTIONS
Processing Speed =
CPU Sleep Mode =
Display Auto Off =
HDD Auto Off =
System Auto Off =
LCD Brightness =
Cooling Method =
The following shows low power settings.
BATTERY SAVE OPTIONS
Processing Speed =
CPU Sleep Mode =
Display Auto Off =
HDD Auto Off =
System Auto Off =
LCD Brightness =
Cooling Method =
sub-window, BATTERY SAVE OPTIONS. When you select
this option, the automatic setting feature (Full Power or Low
Power) is disabled and the user-preferred parameters become
effective. The default setting in the subwindows depends on
the Battery Save Mode: Low Power (Long Life) or Full
Power (Normal Life). For details, see Battery Save Options
below.
High
Enabled
30 Min.
30 Min.
Disabled
Bright
Performance
Low
Enabled
03 Min.
03 Min.
30 Min.
Semi-Bright
Quiet
650CT