Table of Contents
Advertisement
Installing the Battery Pack
To install the battery pack, follow the steps below and refer to Figure 4-3.
WARNING: The battery is a lithium ion battery which can explode if not properly
replaced, used, handled or disposed of. Use only batteries recommended by Toshiba
as replacements.
NOTE: Check the battery's terminals visually. If they are dirty, wipe them clean with a
dry cloth.
1.
Align the connectors and partially insert the connector end of the battery.
2.
Match the connectors and push down gently until it snaps into place.
3.
Place the battery cover in position. The back edge should be about one-half to
three-quarters of an inch from the closed position.
4.
Gently push the cover back until you hear the latch click.
650CT
Figure 4-3 Securing the battery cover and lock
4-7
Advertisement
Table of Contents
Troubleshooting
