Toshiba 650CT Maintenance Manual page 103

2. FORMAT program
(a)
(b)
(c)
(d)
(e)
3. COPY program
(a)
(b)
650CT
Selecting FORMAT displays the following message:
DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?
Select a drive number to display the following message:
Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
Select a media/drive type number and press Enter. A message similar
to the one below will be displayed:
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
Remove the Diagnostics Disk from the FDD, insert the work disk, and
press any key.
The following message will display when the FDD format is executed:
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Format start
After the floppy disk is formatted, the following message will appear:
Format complete
Another format (1:Yes/2:No) ?
Typing 1 displays the message from step (c) above. Typing 2 returns
the test to the DIAGNOSTIC MENU.
When COPY is selected, the following message appears:
FLOPPY DISK FORMAT & COPY : VX.XX
Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
Selecting a media/drive type number will display a message similar to
the one below:
Insert source disk into drive A:
Press any key when ready.
= XXX
= X
[[track, head = XXX X]]
3-49