Toshiba 650CT Maintenance Manual page 175

4.21 Connector Mechanism
Removing the Connector Mechanism
To remove the connector mechanism, follow the steps below and refer to Figures 4-51 to 4-
53.
1. Remove the Docking Adapter covers as described in Section 4.19.
2. Remove two springs on each side of the Docking Adapter.
Figure 4-51 Removing the Docking Adapter springs
3. Remove one M3x4 screw from the metal lever, then remove the lever and
connecting mechanism.
650CT
Figure 4-52 Removing the metal lever
4-51