Table of Contents
Advertisement
4.7
Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figures 4-17 and 4-18.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack as described in Section 4.2.
3.
Open the display.
4.
Using your fingernail or the Toshiba Case Separating Tool, release the six latches
along the front securing the keyboard brace and remove the brace, beginning at
the front side.
5.
Lift out the keyboard and lay it on the wrist rest.
6.
Disconnect the keyboard pressure connectors from PJ14 (the closest connector
to the screen at the back of the computer) and PJ15 on the system board.
CAUTION: The keyboard pressure connectors are very delicate. Release
them very carefully.
4-18
Figure 4-17 Removing the keyboard brace
650CT
Advertisement
Table of Contents
Troubleshooting
