Installing the HDD
To install the HDD, follow the steps below and refer to Figures 4-12 back through 4-9.
1.
Seat the HDD in the bracket and secure it with the four M2.5x4 flat-head
screws.
2.
Make sure the HDD's connectors are properly aligned and insert the HDD into the
computer. Press gently to assure a firm connection.
3.
Close the HDD cover.
4.
Turn the computer upside down and secure the HDD with two M2x6 silver
screws.
5.
Install the optional PC card, optional memory module, and battery pack as
described in Sections 4.4 back through 4.2.
4-14
650CT