Table of Contents
Advertisement
2.
Turn the Docking Adapter over and remove two M2.5x8 silver screws securing
the rails and the upper cover, free the four side latches and lift off the rails, then
remove the upper cover. Use the Toshiba Case Separator to release the latches
securing the upper cover.
Figure 4-46 Removing the upper cover
3.
Remove two M2.5x6 screws and two M2.5x8 silver screws securing the
interface connector cover, free the two latches, and lift off the cover.
Figure 4-47 Removing the interface connector cover
4-47
650CT
Advertisement
Table of Contents
Troubleshooting
