Toshiba 650CT Maintenance Manual page 139

4.6 DAA Module
Removing the DAA Module
To remove the DAA module, follow the steps below and refer to Figures 4-13 to 4-16.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack as described in Section 4.2.
3. Use your fingernail or a thin object to remove the DAA module cover.
4. Remove two M2x6 screws securing the DAA module.
5. Use a small thin, flat screwdriver to pry the DAA module loose from its
connection.
650CT
Figure 4-13 Removing the DAA module cover
Figure 4-14 Removing the DAA module
4-15