Table of Contents
Advertisement
6.
With the DAA module partially out of the computer, grasp and remove it.
7.
Remove two M2.5x4 screws securing the metal plate to the DAA module.
8.
Release the pressure on the lower cover, then remove the metal plate over the
guide pin.
9.
Free the latches securing the upper cover to the DAA module and remove the
cover.
Figure 4-15 Removing the DAA board's upper cover
10.
Free the latches securing the lower cover to the DAA board and remove the DAA
board.
Figure 4-16 Removing the DAA board's top cover
4-16
650CT
Advertisement
Table of Contents
Troubleshooting
