Health Status Panel; Table 18: Health Status - Juniper EX4200 Hardware Manual

Table 17: System Information (continued)
Field
Device uptime
Last configured time

Health Status Panel

Table 18: Health Status

Field
EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300 Switches
Memory util.
Flash
Temp.
CPU load
Fan status
EX4500 and EX4550 Switches
Copyright © 2015, Juniper Networks, Inc.
Description
Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the memory
utilization value of the master Routing Engine is displayed.
NOTE: In EX4300 Virtual Chassis, to display the Routing Engine memory utilization of the master
or backup, click the respective image.
Indicates the usage and capacity of internal flash memory and any external USB flash drive.
NOTE: In EX4300 Virtual Chassis, the flash memory utilization of the master switch is displayed
by default. To display the flash memory utilization along with the internal and external flash memory
utilization details for each switch or line card, mouse over individual switch or line card images.
Indicates the chassis temperature status. Temperatures are listed in Celsius and the corresponding
Fahrenheit values.
NOTE: The field is unavailable for a standalone EX2200-C switch.
Temp
The Temp field is dynamically available for an EX2200 Virtual Chassis switch based on the model
of the member clicked.
NOTE: In EX4300 Virtual Chassis, the temperature of the master Routing Engine is displayed by
default. To display the temperature of the Routing Engine of any switch, click the image of that
switch.
Indicates the average CPU usage over 15 minutes. In a Virtual Chassis configuration, on loading the
master or backup switch, the CPU load for that switch's Routing Engine is displayed by default. To
display the CPU load for a specific switch's Routing Engine, click the image of that switch.
Indicates the status of the fans in the fan tray. The possible values are
Virtual Chassis configuration, the fan status of the master switch is displayed by default. To display
the fan status for any switch , click the image of that switch.
NOTE: The field is unavailable for a standalone EX2200-C switch.
Fan status
The field is dynamically available for an EX2200 Virtual Chassis switch based on the
Fan status
model of the member clicked.
Chapter 5: Viewing System Information
Description
Indicates the time since the last reboot. In a Virtual Chassis
configuration, to display the uptime of the specific switch, click
the image of that switch.
Indicates the time when the switch was last configured.
OK , Failed , and Absent . In a
43