Network Port Connector Pinout Information For An Ex4200 Switch; Table 47: Network Port Connector Pinout Information - Juniper EX4200 Hardware Manual

EX4200 Switch Hardware Guide
Table 46: Management Port Connector Pinout Information (continued)
Pin
3
4
5
6
7
8
Related
Documentation

Network Port Connector Pinout Information for an EX4200 Switch

Table 47: Network Port Connector Pinout Information

Pin
1
2
3
4
5
128
Signal
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
See Rear Panel of an EX4200 Switch on page 12
Connecting a Switch to a Network for Out-of-Band Management on page 185
A network port on the switch uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T
connection. Two LEDs on the port indicate link/activity on the port and the port status.
See Network Port LEDs in EX3200 Switches and
on page 24.
Table 47 on page 128 provides the pinout information for the RJ-45 connector. An RJ-45
cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
Description
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
for port location.
"Network Port LEDs in EX4200 Switches"
Description
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 3
Transmit/receive data pair 3
Copyright © 2015, Juniper Networks, Inc.