Table 41: Optical Interface Support For Gigabit Ethernet Sfp+ Transceivers In - Juniper EX4200 Hardware Manual

EX4200 Switch Hardware Guide
Table 41: Optical interface Support for Gigabit Ethernet SFP+ Transceivers in EX4200 Switches
Ethernet Standard
10GBASE-USR
108
Specification
Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Fiber grade
Modal bandwidth
Distance
DOM support
Software required
Support for Virtual Chassis configuration
Value
EX-SFP-10GE-USR
10 Gbps
LC
Dual
850 nm
–7.3 dBm
–1.3 dBm
–11.1 dBm
–1.0 dBm
MMF
62.5/125 µm 50/125 µm
OM1 OM3
200 MHz/km 500 MHz/km
10 m (32.8 ft) 30 m (98.4 ft)
Available
EX4200-24T, EX4200-24T-DC, EX4200-24P,
EX4200-24PX, EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC, EX4200-48P,
and EX4200-48PX switches—Junos OS for
EX Series switches, Release 10.2 or later
EX4200-24F-S and EX4200-48T-S
switches—Junos OS for EX Series switches,
Release 12.3R4 or later
Yes
Copyright © 2015, Juniper Networks, Inc.
50/125 µm
OM3
1500 MHz/km
100 m (328 ft)