Health Status Panel; Table 18: Health Status - Juniper EX3300 Hardware Manual

Table 17: System Information (continued)
Field
Boot image
Device uptime
Last configured time

Health Status Panel

Table 18: Health Status

Field
EX2200, EX2200-C, EX2300, EX2300-C, EX3200, EX3300, EX3400, EX4200, and EX4300 Switches
Memory util.
Flash
Temp.
CPU load
Copyright © 2016, Juniper Networks, Inc.
Description
Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the memory
utilization value of the master Routing Engine is displayed.
NOTE: In EX4300 Virtual Chassis, to display the Routing Engine memory utilization of the master
or backup, click the respective image.
Indicates the usage and capacity of internal flash memory and any external USB flash drive.
NOTE:
In EX4300 Virtual Chassis, the flash memory utilization of the master switch is displayed by
default. To display the flash memory utilization along with the internal and external flash memory
utilization details for each switch or line card, mouse over individual switch or line card images.
Flash memory utilization is not displayed for EX2300, EX2300-C, and EX3400 switches.
Indicates the chassis temperature status. Temperatures are listed in Celsius and the corresponding
Fahrenheit values.
NOTE: The field is unavailable for a standalone EX2200-C switch.
Temp.
The Temp. field is dynamically available for an EX2200 Virtual Chassis switch based on the model
of the member clicked.
NOTE: In EX4300 Virtual Chassis, the temperature of the master Routing Engine is displayed by
default. To display the temperature of the Routing Engine of any switch, click the image of that
switch.
Indicates the average CPU usage over 15 minutes. In a Virtual Chassis configuration, on loading the
master or backup switch, the CPU load for the Routing Engine of that switch is displayed by default.
To display the CPU load for a Routing Engine of a specific switch, click the image of that switch.
Chapter 5: Viewing System Information
Description
Indicates the version of the boot image that is used. In a Virtual
Chassis configuration, the boot image of the master switch is
displayed by default. To display the boot image of a specific
switch, click the image of that switch.
Indicates the time since the last reboot. In a Virtual Chassis
configuration, to display the uptime of the specific switch, click
the image of that switch.
Indicates the time when the switch was last configured.
33