Disassembling And Assembling The Arm Cover - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

3.3.2 Disassembling and assembling the arm cover

Fig. 2: Disassembling and assembling the arm cover
(1) - Motor cover
(2) - Screws
(3) - Countersunk screw
Disassembling the arm cover
To disassemble the arm cover:
1. Unscrew the motor cover (1).
2. Loosen screws (2) and countersunk screw (3).
3. Disassemble the arm cover (4).
Assembling the arm cover
To assemble the arm cover:
1. Assemble the arm cover (4).
2. Tighten the countersunk screw (3).
3. Tighten the screws (2).
4. Press down the hand crank (5) and check for ease of movement.
 The hand crank (5) must disengage.
5. Tighten the screws for the motor cover (1).
16
①
If necessary, adjust the arm cover position.
⑤ ④
②
(4) - Arm cover
(5) - Hand crank
Service Instructions 911-210-10 - 00.0 - 06/2020
Working basis
③