1.2.7 Removing "SA,SUB PCB PE SENSOR"
1. Remove "SCREW,PHT(BT#3),M2.6×5" and "SA,SUB PCB PE SENSOR".
SCREW,PHT(BT#3),M2.6×5
< Attention at reassembly >
Pass "SA,SUB PCB PE SENSOR" like the
Mark.
< Attention at reassembly >
Confirm the correct operation by pushing "SA,SUB
PCB PE SENSOR".
SA,SUB PCB PE SENSOR
< Attention at reassembly >
Fix "SA,SUB PCB PE SENSOR" to the
Projection.
-13-
CT-S281 SERIES Service Manual