Section 2 - Installing The Printer; Choosing A Location; Unpacking And Setup - Neopost AS-510C Operating Manual

SECTION 2
INSTALLING THE PRINTER
Section 2 – Installing the Printer
Before using the AS-510C printer the following must be done:
• Choose a location for the printer
• Unpack and assemble the printer.
• Install the Inkjet Cartridges
• Set up the feed on the printer
• Plug in the printer and connect it to the computer
• Install the Printer Driver.

Choosing a Location

The AS-510C should be placed on a sturdy worktable or cabinet at least 9 inches
from any walls. Protect the AS-510C from excessive heat, dust, and moisture – avoid
placing it in direct sunlight.

Unpacking and Setup

Remove the Printer and its parts from the carton. Save the packing material. Remove
all packing tape. The screws that attach the various parts of the guides to the printer
are under the tape in their respective positions.
Begin by installing the Fixed Side Guide. It is
held in place by two screws [1]:
3
© 2009 Neopost USA Inc. All rights reserved.