La San Marco 95 SERIES Use And Maintenance Manual page 46

MACHINE START AND STOP CONTROL FROM CLOCK
When the display on the panel 91 shows "AUTO", it means that it is in the condition of "MACHINE OFF AS
PROGRAMMED". If the display shows the "time of day and day of the week", it means that it is in the condition of
"MACHINE ON AS PROGRAMMED".
To program the machine starts and stops with the weekly cycle it is necessary to access functions 8 and B. Operating with
buttons "1" and "2", enter "YES" on the open days and "NO" on the closed days, both AM and PM.
HOLIDAY PERIODS
To program the holiday periods, it is necessary to access function 5. Using buttons "1" (-) and "2" (+), enter the number of
days closed for holidays.
The "closed for holidays" period will start with the shutting off of the machine and the display on the panel 91 will show
"CLOSE". The machine will remain off for the programmed number of days and will start again after the last day.
REGENERATION OF WATER SOFTENER (RIGEN SETUP)
During normal operation, the display shows a progress bar made up of a row of green leds that progressively light up and
indicate the proper time for regenerating the water softener, based on the programmed number of cycles. When the
programmed limit is passed, the red leds will flash, without however shutting down the machine. To reset the count, just press
button "E" (the number of cycles programmed is at the discretion of the user).
DISPLAY OF NUMBERS COUNTED
During normal operation, it is possible to display the number of coffees, teas, etc., served and also the number of cycles of the
water softener. The tallies are accessed by pressing button "2": the number of cycles for regenerating the water softener will be
displayed (see following table). To activate the other functions in sequence, press the "THE" button. To leave the tally display,
press the "E" button.
N° indications on display 91
1 CALC. CYCLE
2 TOTAL CYCLE
3 DOSE 1 CYCLE
4 DOSE 2 CYCLE
5 DOSE 3 CYCLE
6 DOSE 4 CYCLE
7 DOSE 5 CYCLE
8 DOSE 6 CYCLE
9 DOSE MA CYCLE
10 THE MA CYCLE
11 THE 1 CYCLE
12 THE 2 CYCLE
13 CALC. DAY
14 RESET DAY
15 SETUP DAY
16 MACHINE NUMBER
To reset numbers 13 and 14 and to set date at number 15 it is necessary to press button "1" (which causes the digit on the
right to flash) and press the "THE" button.
Similarly, for number 16 button "1" causes the flashing of the digit to be changed and button "2" changes it.
44
F O R T H E U S E R
meaning
N° CYCLES PER REGENERATION
NNNNNN
NNNNNN TOTAL CYCLES (NOT RESETTABLE)
NNNNNN N° COFFEES SERVED DOSE 1 (RESETTABLE)
N° COFFEES SERVED DOSE 2 (RESETTABLE)
NNNNNN
NNNNNN N° COFFEES SERVED DOSE 3 (RESETTABLE)
NNNNNN N° COFFEES SERVED DOSE 4 (RESETTABLE)
N° COFFEES SERVED DOSE 5 (RESETTABLE)
NNNNNN
NNNNNN N° COFFEES SERVED DOSE 6 (RESETTABLE)
NNNNNN N° MANUAL SERVING CYCLES (RESETTABLE)
N° MANUAL TEA CYCLES (RESETTABLE)
NNNNNN
NNNNNN N° TEA 1 CYCLES (RESETTABLE)
NNNNNN N° TEA 2 CYCLES (RESETTABLE)
DATE OF PREVIOUS REGENERATION RESETTING
GG.MM.AA.
(day, month, year on clock) enables resetting of regeneration
GG.MM.AA. DATE OF PREVIOUS RESETTING OF ALL DOSES
(day, month, year on clock) enables resetting of all counters
DATE MACHINE WAS PUT INTO SERVICE
GG.MM.AA.
(day, month, year on internal clock)
NNNNNN MACHINE SERIAL NUMBER