Advertisement
Advertisement
Table of Contents
Related Manuals for La San Marco PLUS 5
Summary of Contents for La San Marco PLUS 5
-
Page 1: Quick Start Guide
QUICK START GUIDE 7770.047... -
Page 2: Machine Description
MACHINE DESCRIPTION LEGEND 1 . PRODUCT CANISTER 2 . PRODUCT CANISTER / COFFEE HOPPER 3 . COFFEE HOPPER 4 . CARD READER 5 . DECAFFEINATED DOOR 6 . INFO BUTTON 7 . DISPLAY 8 . SHIFT BUTTON 9 . DOSE BUTTON 10 . - Page 3 STARTING UP After checking that the machine door is closed and the ground bin and the drip tray are inserted, power on the machine by means of the main switch underneath the machine basement (Fig.A). keep key SHIFT pressed and then press key INFO, (Fig.B) and the machine will set itself to on state. (FOR SELF CONFIGURATION , keep key SHIFT pressed and then press key INFO, before closing the machine front door).
- Page 4 DISPENSING 1) COFFEE/CAPPUCCINO/CHOCO DISPENSING Adjust the coffee dispenser to the correct height and place a cup under it then press the desired dose key. For Waiters’ Card place the smart card above the proper reader before pressing the dose key. The display shows: XXXXXXXX Where “XXXXXXXX”...
- Page 5 STEAM WAND USE AND CLEANING STEAM WAND NOT AVAILABLE FOR MACHINE IN SELF CONFIGURATION 2► Use the steam wand to foam or 1► Before using the steam wand press 3► Press the steam button to stop the heat any liquid into the jug by the steam button to purge the nozzle.
- Page 6 AUTOMATIC CLEANING OF COFFEE GROUP- MIXER AND MILK FROTHER AT THE END OF EACH WORKING DAY , AND/OR IN CASE THE MACHINE WILL NOT BE USED SOME TIME, WE STRONGLY RECOMMEND TO CARRY OUT AUTOMATIC CLEANING OF THE COFFEE GROUP ,THE MIXER AND THE MILK FROTHER. 1►Keep (Shift) key pressed for five 2►...
- Page 7 10► Press (Shift) key to start the Mixer 11►Wait the end of the Mixer cleaning 12► Press (Shift) key to start the milker cleaning cycle. cycle delivery. cleaning cycle. MIXER CLEANING MIXER CLEANING MIXER CLEANING PRESS SHIFT BUTTON PRESS SHIFT BUTTON √...
-
Page 8: Milker Cleaning
17► AT THE END OF THE MILKER CLEANING CYCLE THE DISPLAY WILL SHOW : MILKER CLEANING REPEAT CLEAN USING ONLY WATER PRESS SHIFT BUTTON Put the milk infeed pipe into a glass of cold water Press (Shift) key the milk frother will start dispensing another cleaning cycle only with water. AT THE END OF THE MILKER CLEANING CYCLE WITH ONLY WATER THE DISPLAY WILL SHOW : SELECT DRINK GROUNDS BIN FULL... -
Page 9: Cleaning Tablets
Only in case that after the automatic cleaning process of the coffee outlet or the milk frother are not properly dispensing, carry out a manual cleaning; see the following steps. FOR CLEANING OPERATIONS , La San Marco S.p.A. STRONGLY RECOMMEND TO USE THE FOLLOWING DETERGENT PRODUCTS:... - Page 10 MANUAL CLEANING OF MIXER WE STRONGLY RECOMMEND CLEANING THE MIXERS ONCE A DAY 2► Remove the pipe from the mixer 3► Turn the flange 1 anticlockwise, 1► Open the machine door then remove the mixer 2 5► Rinse the Mixer and the Decanter 4►...
- Page 11 OTHER RECOMMENDED CLEANING DRIP TRAY CLEANING GROUNDS BIN CLEANING Once a day rinse the grounds bin in a Once a day rinse the drip tray in a sink. sink. HOPPER CLEANING DISPENSER CLEANING a) Turn the screw on the top of the a) Turn the screw on the top of the machine anticlockwise and then machine anticlockwise and then...
- Page 12 GRINDERS ADJUSTMENT a) Turn the screw on the top of b) Move the adjustment to the c) Reinsert the hopper and lock it the machine anticlockwise and right to get coarse coffee powder, by turning the screw clockwise. then remove the hopper. to the left for finer.
-
Page 13: Machine Functions Messages
MACHINE FUNCTIONS MESSAGES 1) Alarm for machine door position OPEN DOOR Cause: the front door is open; the micro switch does not touch the door Result: shutdown of the machine functions Solution: press ( Info ) key, the display shows : CLOSE FRONT PANEL OPEN DOOR Close the door and turn the machine ON. - Page 14 Press ( Info ) key, the display shows : CLOSE THE GROUNDS BIN GROUNDS BIN OPEN Reinsert the grounds bin into its housing. 3) Message of missing coffee SELECT DRINK MISSING COFFEE Cause: there is no coffee into the hopper and therefore into the brewing chamber Result: the machine interrupts the coffee-based dispensing selections Solution : press ( Info ) key, the display shows :...
- Page 15 5) Message of drip tray not in position. The display will show the following message: SELECT DRINK DRIP TRAY OUT Cause: the drip tray is not in position. The micro switch contact is open. Result: The message is displayed without disabled the dispensing keys. Solution : press ( Info ) key, the display shows : INSERT DRIP TRAY DRIP TRAY OUT...
-
Page 16: Access The Main Setting Menus With Password Or Smart-Card
remove the drip tray and empty it. PLEASE NOTE: FOR ALL OTHER MESSAGES PLEASE REFER TO YOUR SERVICE CENTER. ACCESS THE MAIN SETTING MENUS WITH PASSWORD OR SMART-CARD A) ACCESS THE MAIN SETTING MENUS WITH PASSWORD To enter the programming environments, a password is required which define the access rights to the different environments. The password must be composed with 5 numbers. - Page 17 KEYS FUNCTION PASSWORD NUMBER NUMBER Exit (edit ) Insert blank Delete character Scroll Enter B) ACCESS THE MAIN SETTING MENUS WITH SMART CARD To enter the programming environments, place one of the following smart cards above the proper reader with the led light ON with the machine in OFF mode: WAITER SMART CARD OWNER SMART CARD...