Playing Back Audio Files; Selecting Audio Files - Roland FR-3X V-Accordion Owner's Manual

Accordion
Hide thumbs Also See for FR-3X V-Accordion:
Table of Contents

Advertisement

Playing back audio files

1.
Insert an optional USB memory into the
FR-3x's USB port (see left).
The FR-3x automatically loads the first audio file in
alphabetical order that it detects in the USB mem-
ory's root folder.
2.
Hold down the [ORGAN/ORCHESTRA] regis-
ter and press register [0] to start playback.
Playback of the selected audio file starts and the dis-
play shows the first three characters of the audio
file's name as well as three dots that flash from left
to right:
ama
. . .
The "scrolling" dots (alternate flashing from left to
right) mean that playback is running.
(In the example above, the display shows the first
three characters of a file called "Amazing
Grace.wav".)
The FR-3x only displays the first three characters of
the audio file names. See "Tip for naming audio files"
on p. 34 for how to ensure that you can tell the files
apart.
See page 70 for how the FR-3x displays the charac-
ters of the selected file name.
NOTE
If you hold down [ORGAN/ORCHESTRA] for more than 2
seconds without pressing another register, the FR-3x
switches to demo song mode. In that case, press [ORGAN/
ORCHESTRA] again to leave demo song mode, then repeat
step 2.
3.
If you are using the audio file as your
accompaniment, start playing on the FR-3x
as you normally would.
4.
To pause playback of the audio file, hold
down the [ORGAN/ORCHESTRA] register and
press register [0].
Playback of the selected audio file stops and the
three dots flash simultaneously:
ama
. . .
If playback is stopped, the three dots flash
simultaneously.
5.
To return to the beginning of the current
song, hold down the [ORGAN/ORCHESTRA]
register and press register [9].
NOTE
[œ]
Press registers [9] (
) and [0] (
view the name of the currently selected audio file.

Selecting audio files

As stated above, the FR-3x automatically selects the
first audio file it detects on the USB memory you insert.
To select a different file, proceed as follows:
1.
Press and hold the [SET] register to enter
PARAMETER mode.
The display shows the name of the last parameter
you selected.
r
V-Accordion
Playing back audio files
[®÷π]
) simultaneously to
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents