Carriage Menu - Pfaff 8390 Instruction Manual

Heat sealing
10

Carriage menu

.08
With the carriage menu, the machine can be moved in a number of different ways.
● Switch on the machine and call up the carriage menu.
The position of the machine on the track bed is shown in the display. The machine can be
moved on the track bed in the following ways:
● By joystick
● By arrow keys
● By double foot switch
● By pedal
Speed settings
This function opens the menu for speed settings. The machine moves at speeds which
can be automatically changed as required. The machine moves fi rst at slow speed, then
afterwards switches to high speed. When approaching the track boundaries or the activated
home position, the machine is reset to slow speed. When reaching the end positions, the
machine is stopped automatically. With the pedal (see Chapter 7.03) the machine moves in
the forwards stage 1 at slow speed, and in the forwards stage 2 at high speed.
Home
+
A home position can be defi ned on the section. To determine the position, the machine
moves to the desired position and with the accompanying key sequence, the current posi-
tion is defi ned as the home position.
62
The operator can stand beside the machine and control the machine. Operating the joy-
stick moves the machine in the direction of operation, see Chapter 7.07 Joystick.
The operator remains seated on the machine and drives the machine by the keys. Press-
ing the left arrow key drives the machine against the sealing direction. With the right ar-
row key, the machine drives in the sealing direction.
See Chapter 7.05 Double foot switch.
The operator remains seated on the machine and can control the machine with the pedal.
If the backwards stage is pressed, the machine changes its direction of movement.
Pressing the forwards stage moves the machine in the new direction, see
Chapter 7.04 Pedal.