Protective Switch And Boot Key - Pfaff 8390 Instruction Manual

Adjustment
13

Protective switch and boot key

.10
● Eliminate the cause of the fault.
● Open the control box and reset protective switch 1.
● Close the control box again.
96
1
Fig. 13 - 11
The protective switch 1 serves as a protection against major damage in case
of a short circuit or overload. The boot key 2 is used to boot-up the machine
control unit, see Chapter 13.11.02 Loading/updating the operating program.
Disconnect the mains plug!
Danger from electric voltage!
Before switching the machine on again, fi rst eliminate the cause of the fault!
1
2