Stipulating The Hot Wedge Type (Only On The Pfaff 8390-010) - Pfaff 8390 Instruction Manual

● Conclude the input, permissible values will be taken over.
__
● Enter the value for the sealing speed within the permissible range.
● Conclude the input, permissible values will be taken over.
Description of further functions
Clear
● When this function key is pressed, the value is set at "0".
Arrow keys
● When these function keys are pressed, the value is increased or reduced.
Esc
When this function key is pressed, the input is cancelled without the value entered being
taken over.
9 Stipulating the hot wedge type
.03.03
● Select the hot wedge type in accordance with the width of the hot wedge installed.
The symbol for the selected hot wedge type appears as an inverse symbol.
Hot wedge
type
1
2
3
(only on the PFAFF 8390-010)
Hot wedge version
Heating cartridge with integrated temperature sensor and fast control
response (width 7 mm, 9 mm and 12 mm, 360 W)
Heating cartridge with external temperature sensor and medium control
response (width 15 mm, 20 mm and 30 mm, 500 or 1000 W)
Heating cartridge with external temperature sensor and slow control
response (width 7 mm, 9 mm and 12 mm, 360 W)
(width > 30 mm, 1000 W)
Preparation
35