Pfaff Creative stylist MN 110 Frequently Asked Questions Manual

Frequently Asked Questions
creative stylist
PFAFF
®
Setup / Operation
creative stylist
Does my PFAFF
®
Your PFAFF creative stylist
®
lubrication to the rotary hook, level arms, and machine head. The rotary hook should be lubricated with
two to three drops of standard sewing machine oil every four hours when in constant use, or prior to
turning on the machine. The four level arms should be lubricated with sewing machine oil every week of
continuous use. The machine head rail should be lubricated every week, and the black metal bar on the
machine head should be lubricated with white lithium grease every five months. See your owners manual
for more instructions.
Error: Main Axis not at 100 degrees
The machine needs to be at 100 degrees for normal operations. A main axis error is the machine's
way of letting you know that the sensor is not aligned. To resolve this, select the 100 degree icon on
your control panel. If a "No needle" error is displayed, then the needle is not being detected over the
working area. To correct this, turn off the machine. Then, locate the degree wheel knob in the back of
your machine and manually align it to 100 degrees. Turn the machine back on, and the machine will
automatically find a needle position. After everything has finished loading, press the 100 degree icon on
the panel once more. If there are no more error messages displayed, the machine is functional.
Note: On rare occasions, this process may need to be repeated before the sensors reset. Simply go
through the procedure until the needle position is recognized.
MN 110
™
MN 110 embroidery machine need any special maintenance?
™
MN 110 embroidery machine is easy to care for but it does need regular
™
®