Adjustment
13
Adjusting the hot air nozzle on the PFAFF 8390-020
.07
13
Lateral adjustment and setting the angle of the hot air nozzle
.07 .01
● Switch on the machine and set the sealing temperature at its minimum value.
● Call up the input menu.
● Position the heating element
● Adjust screw 1 (screws 2) in accordance with requirement 1.
● Adjust hot air nozzle 3 (screw 4) in accordance with requirement 2.
● Switch off the machine.
92
Requirement
1. When hot air nozzle 3 is engaged, in the feed direction it should be centred to the feed
rollers.
2. The front edge of the hot air nozzle 3, as seen from the rear, should be positioned par-
allel to the axes of the feed rollers.
3
4
Fig. 13 - 07
Let the heating element cool down!
Danger of burns if the heating element is touched!
1
2
2
3