Table of Contents
Advertisement
● Select the nozzle type in accordance with the width of the nozzle installed.
The symbol for the selected nozzle type appears as an inverse symbol.
● Using the number block, enter the value for the hot air volume within the permitted
__
range.
● Conclude the input, permissible values will be taken over.
Description of further functions
Clear
● When this function key is pressed, the value is set at "0".
Arrow keys
● When these function keys are pressed, the value is increased or reduced.
Esc
When this function key is pressed, the input is cancelled without the value entered being ta
Nozzle type
Width of nozzle
1
2
10 mm - 30 mm
3
< 10 mm
> 30 mm
Preparation
37
Advertisement
Table of Contents
