Dc-Motors Error (Feed Rollers); Error With Carriage - Pfaff 8390 Instruction Manual

Adjustment
13 DC-motors error
.12.03
13

Error with carriage

.12.04
104
(Feed rollers)
Error number Discription
0 No error
10 Incorrect command code
11 Invalid speed
12 Invalid acceleration
13 Start with dead motor
14 Set differential with master
15 Contouring error
16 Overload current
17 Over 5 V positioning voltage with standing motor (possible cause:
Load moment (tension, surge, stationary rollers, if necessary too
large differential tolerance)
Error number Discription
0 No error
1
Transmission error
2 Data error
3
Parameter error
4
ETX missing
5 Watchdog
6
Timeout
7
ACK missing
8 Checksum
9
Error P40ED with error number
10
Safety monitoring