Table of Contents
Advertisement
11
Function "POS1 speed"
.05.02
0
+1
Standard pedal functions (see chapter 7.04)
+2
It may become necessary to reduce the welding speed for a short time during the welding
process (e.g. when passing transverse seams). For this purpose, a reduced welding speed is
-1
assigned to pedal setting +1 by way of parameter "POS1speed".
Call up parameter "POS1speed" (see chapter 13.14 "Parameter Settings")
The input value determines the reduced speed of pedal level +1 as a percentage value of
the current welding speed.
Input
79
Advertisement
Table of Contents
