Car and Maintenance
12
Care and Maintenance
12
Servicing and maintenance intervals
.01
12
Cleaning
.02
● Before each start up remove any residues on the top or bottom side of the heating
● Clear the opening of the hot air nozzle from sealing residues as required.
82
Cleaning the whole machine ......................................................................................weekly
Cleaning the hot wedge ...................................................................................... as required
Cleaning the hot air nozzle .................................................................................. as required
Grind the hot wedge ........................................................................................... as required
Clean air fi lter of air-fi lter/lubricator ..............................................................when required
Check/adjust air pressure ............................................................................daily, before use
Switch off the machine and let it cool down!
Danger of burns if the heating element is touched!
wedge with a soft wire brush.
or