Table of Contents
Advertisement
Adjustment
15
Service menu
.15
Information about machine inputs and outputs as well as values for the two pedals and the
handwheel position are displayed in the service menu.
In addition, the functions shown below can be performed.
O Switch the machine on.
O Call up entry mode.
O Call up the service menu.
Description of the functions
Input mode
Quit the service menu and call up the input mode.
Sewing mode
Quit the service menu and call up the sewing mode.
Set/reset the outputs
Select the desired output using the arrow functions and set "Function 1" or reset
"Function 2".
Parameter reset
All parameters are reset to the default values.
Program reset
All seam programs are reset to the default values.
Sensor menu
The sensors of the transmitted light transmitter and the bobbin thread monitor can be
adjusted after calling up this function.
Motors
The stepping motors for the band feed wheel as well as the sewing motor can be moved
after calling up these functions.
Control panel
See chapter 9.12 Setting the control panel in the instruction manual.
49
Advertisement
Table of Contents
