Heat sealing
10
Example of how to enter a sealing program
.03.07
The following example should be fi led under program number "10" with the comment "ex-
ample 1", and consists of three seam zones:
1. Seam zone 1 with switch to another zone after 5000 mm seam length
2. Seam zone with increased sealing speed and switch to another zone after 1500 mm
3. A loop with 22 runs to zone 1.
4. Move back to starting position with rapid traverse.
● Switch on the machine.
● Call up the input menu.
● Call up the programming function.
● Enter program number "10".
● Confi rm input.
52
The sealing parameters from the manual sewing mode are taken over for seam zone 1.