Adjusting The Contact Pressure Of The Hot Wedge (Only On The Pfaff 8390-010); Stipulating The Nozzle Type And Hot Air Volume (Only On The Pfaff 8390-020) - Pfaff 8390 Instruction Manual

Preparation
9 Adjusting the contact pressure of the hot wedge
.03.04
9 Stipulating the nozzle type and hot air volume
.03.05
● Increase or reduce the hot air volume directly
or
● Call up input menu to enter hot air volume.
36
1
Fig. 9 - 02
(only on the PFAFF 8390-010)
● Loosen the locknut 1.
● Adjust the pressure by turning the nut 2
in accordance with the sealing operation,
also see Chapter 13.06.02 Hot wedge
pressure on and clearance to the feed
rollers.
● Tighten locknut 1.
2
(only on the PFAFF 8390-020)