Sealing Parameters - Pfaff 8390 Instruction Manual

Heat sealing
10

Sealing parameters

.03.03
● Enter sealing parameters for each zone as described in Chapter 9.03 Entering sealing
Description of the functions
Heat sealing temperature
This function is used to alter the heat sealing temperature, see Chapter 9.03.01 Entering
the sealing temperature.
Feed stroke (sealing speed)
This function is used to open the menu for entering the feed stroke difference, the brake and
acceleration profi les and the start delay for the feed rollers, see Chapter 9.03.02 Entering
the sealing speed.
Roller pressure
This function is used to alter the roller pressure, see Chapter 9.03.04 Entering the roller
pressure.
Hot air volume (nur bei der PFAFF 8390-020
This function is used to alter the hot air volume.
46
parameters (manual heat sealing).