Replacing Consumable Parts; Replacing The Wipers - Roland XC-540 User Manual

5-4 Replacing Consumable Parts

Replacing the Wipers

The wipers are components that you use when cleaning the print heads. When the screen displays a message like the
one shown, it means the item needs to be replaced. Replace with new items.
TIME FOR
WIPER REPLACE
Press
Important Notes on This Procedure
➢To prevent the heads from drying out, finish this procedure in 30 minutes or less.
➢A warning beep sounds after 30 minutes. At this time, stop work, attach the right side cover, and press
When the head-protection operation finishes, restart the procedure from the beginning.
CAUTION
1.
Display the [REPLACE WIPER] menu.
–
MENU
SUB MENU
—
SUB MENU
MAINTENANCE
˜
MAINTENANCE
REPLACE WIPER
™
NOW PROCESSING..
OPEN FRONT
COVER
š
FINISHED?
›
72 Chapter 3 Maintenance and Adjustment
.
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Press
Press
Press
Press
Press
Press
The print-head carriage moves to a location permitting wiper replacement, and
then the screen shown in the figure appears.
Open front cover.
Preparations are complete when this screen appears.
Touch the location shown in the figure to discharge any static elec-
tricity.
.
several times.
.
.
.
.
.