Roland XC-540 User Manual page 35

4.
Set the media clamps and close the front cover.
–
Media clamp
—
Front cover
˜
SETUP SHEET
ROLL
™
Press .
Important Note When Using the Media Clamps
Insert the media clamps firmly all the way until they engage with an audible click, and make sure they will not come
loose. Incorrect mounting may cause the media to catch or snag and make correct printing impossible, or may lead to
malfunction or poor output quality.
2-2 Loading and Cutting Off Media
Set the media clamps.
The media clamps have dixtinct left and right sides.
Install them like shown in the figure.
Media clamp
Line up the hole with the end of the media
Close the front cover.
Use
Press .
to select [ROLL].
Chapter 2 Operation 33