How To Cut Off Media - Roland XC-540 User Manual

How to Cut Off Media

Procedure
–
media clamp
—
front cover
˜
Make sure the
™
The media is cut off at a
location referenced to the
present tool position.
Cut-off Operations
Before you perform cutoff, be sure to detach the media clamps. .
Performing cutoff with the media clamps remaining attached may cause the operation to be interrupted due to detec-
tion of the media clamps.
When you're performing cutoff, never use the
Unless the end of the media has been pulled out to a location to the front of the platen, cutoff may not be
performed smoothly.
Open the front cover.
Detach the media clamps.
Close the front cover.
lights up.
Hold down
2-2 Loading and Cutting Off Media
for one second or longer.
to pull the media back.
Chapter 2 Operation 35