6-3 Matching the Printer to the Operating Environment
Making the Setting for Automatic Adjustment of the Printer to the Operating Environment
Procedure
MENU
CUTTING MENU
CUTTING
MENU
AUTO
ENV .
AUTO ENV. MATCH
DISABLE
W 1346mm
SETUP SHEET
ROLL
Description
This setting enables or disables the feature for automatic adjustment to optimize the state of the machine to the
environment where it is used (temperature and humidity). It is normally set to "ENABLE."
Performing automatic adjustment can reduce misalignment in the scanning direction (the direction of carriage move-
ment) during printing or cutting.
Default Setting
[AUTO ENV. MATCH]: ENABLE
84
Chapter 6 Feature Reference
Press
Press
Press
Press
MATCH
Press
ENABLE
Use
Press
Press
Press
.
.
.
.
.
to select "EABLE".
to enable the setting.
.
to go back to the original screen.