Roland XC-540 User Manual page 82

5-6 When Moving the Unit
2.
Secure the print heads in place.
–
Remove the drain bottle and detach the bottle stand. Then attach the drain-tube cover.
—
Detach the blade holder.
˜
Raise the loading lever.
™
Secure the print heads in place using the packing material.
š
Lower the roll media from the printer and detach the shafts.
If necessary, also detach the dancer roller, rail slider and standlegs.
The machine is now ready to be moved.
3.
Immediately move the machine and fill it with ink.
–
Once the preparations are complete, move the machine with as little delay as possible.
—
Immediately reinstall the machine and fill with ink.
To reinstall and fill with ink, go to "Setup Guide." When filling with ink, you use the cleaning cartridges again.
80 Chapter 3 Maintenance and Adjustment