Roland XC-540 User Manual page 52

3-3 Cutting Using the Crop-mark Feature
Media Sizes Allowing Automatic Crop Mark Detection When Reloading the Media
When you're cutting off media printed with crop marks, reloading it, and performing automatic crop-mark detection,
set a margin of at least 90 millimeters before the next print-start position. For other margins, refer to the figure below.
You can set the margin value with the software RIP you're using. For information on how to make the setting, refer to
the documentation for the software RIP you're using.
1.5 mm (about 0.06 in.)
50 Chapter 3 Using the Cutting Feature
Crop marks Pinch rollers
90 mm (3-9/16 in.)
or more
22.5 mm (0.89 in.)
The actual size where
output is possible
22.5 mm (0.89 in.)
80 mm (3-3/16 in.) or more
Where to cut the media off
1.5 mm (about 0.06 in.)