3.
Quit the manual cleaning mode.
NOW PROCESSING..
CLOSE MAINTE-
NABCE COVER
Maintenance cover
MAINTENANCE
CLEANING
W 1346mm
SETUP SHEET
ROLL
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform cleaning several times as required.
P.40 "Printing Test and Cleaning"
5-3 Cleaning the Heads Using the Cleaning Kit
Close the front cover.
Press
.
The print-head carriage moves to the right side of the machine, and then the
screen shown in the figure appears.
Open the front cover and close the maintenance cover.
Close the front cover.
Press
.
Press
to go back to the original screen.
Chapter 3 Maintenance and Adjustment
71