Printing The Amount Of Remaining Media; Returning All Settings To Their Initial Values - Roland XC-540 User Manual

6-5 Setting How the Printer Operates
Description
Setting this to "ENABLE" automatically displays [SHEET REMAIN] whenever you change the media and finish setup.
This makes it impossible to go on to the next operation unless you redo the setting for the amount remaining. This can
be useful for keeping you from forgetting to redo the setting when you change the media.
When you set this to "ENABLE", however, be sure also to set the [EDGE DETECTION] menu item to "ENABLE". When
[EDGE DETECTION] is set to "DISABLE", then [SHEET REMAIN] is not displayed automatically, regardless of the
setting for [AUTO DISPLAY].
Also, when sheet media is loaded (that is, when [SHEET SELECT] is set to "PIECE"), the setting for the amount of
remaining media is made automatically, and so this menu is not displayed.
P.86 "Using Transparent Media"
Default Setting
[AUTO DISPLAY]: DISABLE

Printing the Amount of Remaining Media

Procedure
–
MENU
SHEET REMAIN
—
SHHET REMAIN
PRINT MEMO
˜
W 1346mm
SETUP SHEET
ROLL
Description
This prints the amount of media remaining that is displayed at the top menu. You use this when you want to make a
record of the remaining length of the media now in use. Printing the amount of media remaining before you change
the media enables you to refer to the printed record and use the value to make the setting for the remaining amount the
next time you use the media.

Returning All Settings to Their Initial Values

Procedure
–
MENU
SUB MENU
—
SUB MENU
FACTORY DEFAULT
Description
This menu returns all settings to the same as their factory defaults. However, the settings for [LANGUAGE], and
[LENGTH UNIT], [NETWORK] are not returned to the factory defaults.
96 Chapter 6 Feature Reference
Press .
Press twice.
Press .
Press to perform printing.
Press .
Press to go back to the original screen.
Press .
Press several times.
Press .
Press several times.
Press to execute.