Loading And Cutting Off Media; How To Load Media - Roland XC-540 User Manual

2-2 Loading and Cutting Off Media

How to Load Media

CAUTION
CAUTION
CAUTION
1.
Load the media onto the roll shaft.
–
Media clamp
—
Attach the media flanges to the roll media.
Press in to fit on securely.
˜
Place the roll media on the shafts.
Make sure the brake is engaged when you do this.
Roll media
30 Chapter 2 Operation
Load roll media correctly.
Otherwise the media may fall and cause injury.
Roll media weighs about 30 kg (67 lb.). To avoid injury, handle with care.
Never load media that weights more than 30 kg (67 lb.).
The machine may fail to withstand the weight and tip over or cause the media to fall.
Media clamp
Shaft
Shaft
Open the front cover.
Move the media clamps to the sides.
Front cover
Media flange
Match to the inner
diameter of the roll-
media core.
Brake
2 in.
3 in.