Microsd Card; Installing/Removing Microsd Card - NTT docomo Arrows Kiss F-03E Instruction Manual

Table of Contents

Advertisement

◆ Security code of docomo mini UIM
card
There is a security code called PIN code in the docomo mini
UIM card. The code is set to "0000" at subscription, which you
can change by yourself.→P108

microSD card

◆ microSD card
The terminal supports microSD card of up to 2 GB,
microSDHC card and microSDHC UHS-I card of up to 32 GB,
microSDXC card and microSDXC UHS-I card of up to 64 GB
(as of November, 2012). Note that DOCOMO does not
guarantee actual operations of all microSD cards. For
information on compatible microSD cards, contact
manufacturers of microSD cards.
Do not turn the power OFF or give shock while accessing
data on the microSD card. The data may corrupt.
✔INFORMATION
A microSDXC card can be used only on a compatible device.
Inserting a microSDXC card into a non-microSDXC-
compatible device may damage or destroy data saved on the
microSDXC card. Do not insert one. If you want to reuse a
microSDXC card on which data is destroyed, format
microSDXC card (all data will be erased) on an SDXC-
compatible device.
When copying data to/from a non-SDXC-compatible device,
use a microSDHC card or microSD card complying with
standards of device to share data.

◆ Installing/Removing microSD card

A microSDHC card (sample) is inserted when purchased.
Before using, refer to the instruction manual for microSDHC
card.
Turn the terminal OFF, remove the back cover and the
battery pack before installing/removing.→P32
■ Installing
a With the metal contacts side facing down, insert a microSD
card in the direction shown until it locks
31
Before using the terminal

Advertisement

Table of Contents
loading

Table of Contents