Updating Software Automatically - NTT docomo Arrows Kiss F-03E Instruction Manual

◆ Updating software automatically

Update file is automatically downloaded and software is
updated at the specified time.
❖
Automatic update setting
･
The settings of Software Update is set to [Automatic Update]
by default.
1
From the Home screen,
[About phone]→[Software Update]→
[Configure the software update]
2
[Automatic Update]/[Manual Update]
→[Settings]→
189
❖
When software update is necessary
If the update file is downloaded automatically,
update available) appears on the status bar to notify.
･
When the rewrite start time is reached with
update available) displayed, software is automatically
rewritten and (software update available) disappears.
1
Open the Notification panel and tap the
notification
Software update notice screen appears.
Rewrite notice screen
2
Perform target operations
Closing confirmation :
Return to the Home screen. Updating starts when the
preset time is reached.
Changing preset time :
For reserved update →P190 "Reserving software update"
Rewriting immediately :
For updating immediately →P190 "Updating software
immediately"
(software
(software
[OK]
[Set Time]
[Start update]
Appendix/Index