Charging With Ac Adapter - NTT docomo Arrows Kiss F-03E Instruction Manual

･
If the charge information rapidly flashes or turns off before
the charging is complete, remove the terminal from the
wireless charger and put it on again, or remove and reinsert
the AC adapter of the wireless charger and charge again.
✔INFORMATION
･
Remove the dedicated AC adapter from the outlet when not
charging for an extended period.
･
If charging does not start, remove the terminal from the
wireless charger and put the terminal on it approximately 2
seconds later.
･
If you use a carrying case for the terminal, remove it before
charging with the wireless charger.
･
If the charge information of the wireless charger rapidly
flashes, it may be an abnormality of charging or malfunction.
Check if no foreign substance between the wireless charger
and terminal, then put the terminal on or remove and insert
the power plug from and into the outlet.
･
If the battery pack becomes hot, charge information flashes
slowly and charging stops automatically even if the charging
is not complete.
･
Place the wireless charger as far as possible from TVs or
radios because charging may cause noises on TVs or radios.
･
Using electronic devices around the wireless charger may
cause charging failure. Use electronic devices 30 cm or more
away from the wireless charger.
･
While charging with the wireless charger, call conditions or
reception conditions of 1Seg may become deteriorate.
･
While charging with the wireless charger, clock in landscape
view appears (Clock when on charger).
- Duration of time before the clock turns off depends on the
setting of Sleep/Lit when held.
- You can show or hide the clock.→P100
- Depending on the screen displayed, the clock may not be
displayed because the terminal recognizes that operations
or functions are in process.

◆ Charging with AC adapter

You can charge with an optional AC Adapter 03.
a Open the jack cap of the terminal, insert a microUSB plug
of a microUSB cable into the external connection jack with
engraved side facing up
b Insert the USB plug of the microUSB cable into the AC
adapter jack
c Insert the AC adapter's power plug into an outlet
･
Indicator LED lights red while charging, and turns off
when charging is complete.
d When charging is complete, remove the AC adapter's
power plug from the outlet
e Remove the microUSB cable from the AC adapter and
terminal, and close the jack cap of the terminal
37
Before using the terminal