Bluetooth Device - NTT docomo Arrows Kiss F-03E Instruction Manual

◆ Connecting with registered Bluetooth
devices
Connect Bluetooth device. You can talk or play back sounds or
music using a Bluetooth device, or exchange data to or from a
Bluetooth device. And you can enter characters on the
terminal with Bluetooth compatible keyboard.
･
Set a Bluetooth device to connection stand-by mode in
advance.
･
When connected, appears on the status bar.
1
From the Home screen,
[Bluetooth]
･
If Bluetooth devices do not appear, tap [Not visible to
other Bluetooth devices]/[Only visible to paired devices]
to switch to [Visible to all nearby Bluetooth devices],
then tap [SEARCH FOR DEVICES].
2
Tap a Bluetooth detected→Enter a pass code
(PIN) if necessary, [OK]/[Pair]
■ When connection is requested from another

Bluetooth device

If a Bluetooth pair setting request screen appears, enter a pass
code (PIN) if necessary and tap [OK], or tap [Pair].
✔INFORMATION
･
A message notifying that communication charges may
become high appears when connecting with DUN (Dial-Up
Network Profile).
→[Settings]→
126
◆ Sending or receiving data to or from
Bluetooth device
You can send data such as Gallery (→P155) and contacts or
receive data from a Bluetooth device.
･
Set a Bluetooth device to connection stand-by mode in
advance.
<Example> Sending files in Gallery
1
Open Gallery and touch and hold an image
2
→[See all...]→[Bluetooth]/
3
Tap a Bluetooth device
Open the Notification panel to check if transmission is
completed.
<Example> Receiving files from a Blutooth device
1
Send files from a Bluetooth device
2
After file arrival is notified, open the
Notification panel →[Bluetooth share:
Incoming file]→[Accept]
･
To check received files, from the Home screen,
[Settings]→[Bluetooth]→
◆ Canceling connection with a Bluetooth
device
1
From the Home screen,
[Bluetooth]
2
Tap a Bluetooth device→[OK]
→
→[Show received files].
→[Settings]→
File management