Data Management; Using Microsd Card - NTT docomo P-06C STYLE Series Instruction Manual

Data Management

Using microSD Card

If you do not have a microSD card, you need to purchase it.
⿠P-06C supports a commercial microSD card of up to 2
Gbytes and microSDHC card of up to 32 Gbytes (As of
April 2011).
For the latest operation check information such as the
memory capacity and manufacturers of microSD cards,
access the following sites (in Japanese only). Note that
the microSD cards other than published in the sites might
not correctly work.
・ From i-mode to P-SQUARE (As of April 2011)
iMenu→メニューリスト (Menu List)
→ケータイ電話メーカー (Mobile Phone Maker)
→P-SQUARE
・ From personal computers
http://panasonic.jp/mobile/
Note that the published information is the result obtained
from the operation check, which does not necessarily
guarantee all performances of those microSD
cards.
⿠Make sure that you turn off the power, and then
insert/remove the microSD card.
Inserting/Removing microSD Card
1
With the metal
terminal surface facing
downward, make sure
that the cut edge is
positioned at right and
then insert.
⿠Push it until it clicks.
When you remove the microSD card
Push the microSD card until it stops and remove it.
⿠Note that the microSD card may pop out when you insert or
remove it.
The inserting slot of the microSD card is
in the inside of the back cover.
To insert it, remove the back cover and
open the inner cover, and then remove
the battery pack.
89