Initial settings
You can set necessary items collectively for the first time to
use the terminal.
・
Each setting can be changed anytime.
1
From the Home screen,
[Initial settings]
2
Set each item
Slide-in function : Set a function which allows you to
activate an application by sliding your finger from the
edge of the screen and to capture screen as an image.
→P120
Screen lock auth : Set whether to activate screen lock
authentication.→P109
Security unlock preference : Set unlocking method of the
screen lock.→P110
Easy data transfer support : Restore data of a mobile
phone via a microSD card.
❖
Easy data transfer support
Restore mobile phone data saved on a microSD card to the
terminal.
・
Restore data of phonebook, redial/incoming history,
schedule, bookmark, alarm, received/sent/unsent mails.
→[Settings]→
49
1
From the Home screen,
[Initial settings]→[Easy data transfer support]
Check guidance for each data restore location and tap
[OK]. Then follow the onscreen instructions.
・
If you do not want to display the guidance screen next
time, mark [Don't display this screen again.] before
tapping [OK].
✔INFORMATION
・
To view restored received/sent/unsent mail, from the
Application menu, tap [sp-mode mail]→
select the location.
・
To display the restored schedule, synchronize with the
account on the restore location. The last registered Google
account will be set as account to restore.
・
On some mobile terminals which do not support Easy data
transfer support, part of data cannot be restored.
❖
About other initial settings
Set the following items as required in addition to the initial
setting items.
・
Google account setup etc.→P106
・
Email account settings→P74
・
Wi-Fi functions settings→P90
・
Access point (APN) settings→P88
・
Switching to English display→P120
→[Settings]→
→[Import] to
Before using the terminal